|
 |
|
Current Position：Home 》Product |
|
|
| Title：Ammonia line monitor |
|
| Details： |
Heavy Metal Series line monitor water quality advantages
Widely used in industrial wastewater, surface water, drinking water, sea water and industrial process control, total copper, total nickel, total chromium, total lead, total arsenic, total zinc, total cadmium, hexavalent chromium, copper ion, nickel ion , manganese and other on-line automatic continuous analysis and detection; product stable performance, simple operation, wide measurement range, powerful, low failure rate, low maintenance, long life, high cost, and good accuracy.
Heavy Metal Series line water quality monitoring Instrument features
● user-friendly design, making the product compared to similar products with lower failure rate, lower maintenance, longer life and higher cost and accuracy;
● Using imported selector valve, long life, easy installation, easy maintenance and replacement;
● achieve accurate measurement reagents through visual photoelectric control system, overcome peristaltic pump tubing quantitative errors caused by wear;
● peristaltic pump vacuum suction way to take in the tubing between the reagent and there is always an air buffer, to avoid corrosion of pipes and pump tubing for peristaltic pump corrosion cracking case of hardware;
● imported modified PTFE material transparent hose, diameter greater than 1.6mm, reducing the impact on the water like particles clogging the system measurements;
● The original source of U.S. imports, greatly improve measurement accuracy and detection limit.
Heavy Metal Series line water quality monitoring technical parameters
Analysis: colorimetry;
Measuring range: Measuring range extension or custom upon request
LOD: 0.001mg / L;
Accuracy: better than full scale ± 10%;
Reproducibility: ± 10%;
Analysis period: The minimum period of 30 minutes analysis;
Measuring cycle: the time interval (1 ~ 9999min arbitrarily set)
And 24H whole point of time measurement mode;
Calibration cycle: automatic calibration for each measurement instruments;
Maintenance cycle: once a month (based on the use of the actual situation may be);
Signal output: standard RS-232 (RS485 optional) and 4 ~ 20mA,
0 ~ 5V output (output ports can be added according to the actual situation);
Environmental requirements: Temperature adjustable interior, recommended temperature +5 ~ 35 ℃;
Humidity ≤ 90% (non-condensing);
Power supply: AC230 ± 10% V, 50 ± 10% Hz, 15A;
Other: Instrument abnormal automatic alarm; power data is automatically saved;
Touch screen display and command input; abnormal reset and power calls, Miriam
Automatically discharge the residual reactants, automatic return to work status. |
| [ Return ] |
| |
|
|
